JetCard 2205 Overview
5-ports 10/100Mbps Fast Ethernet Switch Universal PCI Card
- Supports 32 bit Universal PCI bus
- 5 10/100TX ports with Auto MDI/MDI-X
- IEEE 802.3 10 Base-T and 100 Base-Tx compatible
- Full or half duplex at 10/100 Mbps
- IEEE 802.3u Auto-Negotiation supported
- QoS supported for packet forwarding precedence
- Supports Windows 7/Vista/NT/2000/2003/XP, Linux 2.4/2.6
- -25~70oC operating temperature for hazardous environment application
Production change notification
The JetCard 2205 is a flexible and high performance five-port Ethernet switch card in Universal PCI format. The universal PCI bus of JetCard 2205 supports both +3.3V and +5V slots. With the -25~70oC wide operating temperature range, JetCard 2205 is an ideal embedded networking solution for industrial applications.
Unmanaged Ethernet Switch: The JetCard 2205 uses Marvell 88E6065 chip to provide 5 Ethernet ports and each port offers IEEE 802.3 10 Base-T and 100 Base-Tx compliant Ethernet data transmission with auto MDI/MDI-X and auto- negotiation.
Auto MDI/MDI-X: The JetCard automatically determines whether or not it needs to interchange cable sense between pairs so that an external crossover cable is not required. If the JetCard interoperates with a device that cannot automatically correct for crossover, the JetCard makes the necessary adjustment prior to commencing Auto-Negotiation.
Flow control: The JetCard supports back-pressure and pause frame-based flow control schemes to ensure zero packet loss under temporary traffic congestion.
QoS (Quality of Service): QoS for networks is an industry-wide set of standards and mechanisms for ensuring high-quality performance for critical applications. JetCard provides the shared memory-based QoS switch architecture. Packets are directed into one of four traffic class queues based upon Port, IEEE 802.1p, IPv4’s TOS or Diff-Serv, or IPv6’s Traffic Class.
Ethernet Statistics monitoring: The JetCard has a set of thirty, 32-bit counters to provide a set of Ethernet statistics for frames received on ingress and transmitted on egress. A register interface allows the JetCard to capture, read, or clear the counter values.
Customized Configurations: JetCard supports an add-on EEPROM for programming its internal registers. The EEPROM data will be read in once the JetCard is reset.
JetCard 2205 usage
Without driver JetCard 2205 works as an unmanaged switch, where users will not see the IP address/Netmask configuration interface and will not be able to communicate with devices, whereas with standard driver built in Windows system the card will work as Network interface card on your PC, allowing users to have an IP address/Netmask configuration interface and communicate the devices with the IPC. For more details on how to use JetCard, check our FAQ page - Click Here!
Dimensions (Unit -mm)