JetNet 4010 Specifications

IEEE 802.3 10Base-T Ethernet
IEEE 802.3u 100Base-TX Fast Ethernet
IEEE 802.3u 100Base-FX Fast Ethernet
IEEE 802.3x Flow Control and Back-pressure
IEEE 802.1p class of service
IEEE 802.1Q VLAN and GVRP
IEEE 802.1D-2004 Rapid Spanning Tree Protocol (RSTP)
IEEE802.3ad LACP
IEEE802.1X Port_based Network Access Control

Store and Forward Technology with 32Gbps Switch Fabric.

2.976Mpps/ 64bytes packet length

64 bytes to 1522 bytes (with VLAN Tag)

8K MAC

1Mbits

Dry Relay output with 1A@24V ability

Cisco-Like CLI, JetView, Web, HTTPS, SSH; TFTP/Web Update for firmware and configuration backup/restore, DHCP Client, Warm reboot, Reset to default, Admin password, Port Speed/Duplex control, status, statistic, MAC address table display, Static MAC, Aging time

Up to 5 Static Trunk and 802.3ad LACP

IEEE802.1Q VLAN, GVRP. Up to 64 VLAN groups

Four priority queues per port,
IEEE802.1p COS and Layer 3 TOS/DiffServ

IGMP Snooping V1/V2/V3 for multicast filtering and IGMP Query V1/V2

Ingress filtering for Broadcast, Multicast, Unknown DA or All packets, and Egress filtering for All packets

Network Time Protocol to synchronize time from
internet or local PC

Embedded hardware watchdog timer to auto reset system when switch system failure

Online traffic monitoring on multiple selected ports

Assign authorized MAC to specific port

IP security to prevent unauthorized access

IEEE 802.1x for user access authentication with local access list or remote Radius server

DHCP Client, DHCP Server with IP binding MAC or
excludes IP address functions

Automatic warning by pre-defined events

Supports both Local mode and Server mode

Rapid Spanning Tree Protocol: IEEE802.1D-2004 Rapid Spanning Tree Protocol. Compatible with Legacy STP and IEEE802.1w.

2nd generation Korenix Ring Redundancy Technology. Failure recovery within 5ms

Support multiple node to node, multiple path to one node to obtain more flexible and reliable architecture.

Provides port aggregate function in ring path to get more bandwidth for higher throughput ring architecture.

New generation of ring coupling technology without extra control port - TangentRing

Backward compatible in client mode

Number of Ports: 10/100TX: 7 x RJ-45, Auto MDI/MDI-X, Auto Negotiation
10/100TX: 3 x RJ-45, combo with SFP
100Base-FX: 3 x SFP with Hot Swappable

10Base-T: 2-pair UTP/STP Cat. 3, 4, 5 cable (100m)
100 Base-TX: 2/4-pair UTP/STP Cat. 5 cable (100m)

10/100 RJ-45: Link/Activity(Green), Full duplex/Collision (Yellow)
Gigabit Copper/SFP: Link/Activity(Green)
Unit: Power(Green), Digital Out(Red), Digital Input(Green), R.M.(Green)

RJ-45 Connector, Pin3: TxD, Pin6: RxD, Pin5:GND

2 sets of power Inputs

2 sets of Digital Input
Logic Low (0): 0-10VDC/Logic High(1): 11-30VDC

2 sets of Relay outputs for pre-defined events

Reset button is provided to restore default settings

12~48V/-12~-48VDC with Reverse Polarity Protection

12 Watts @ DC 48V

DIN-Rail mount or Wall Mount

IP-31 protection, aluminum metal case

137mm(H) x 96mm (W) x 119mm (D)( without DIN rail clip)

0.915kg with package

-20 to 70°C

5% to 95% (Non-condensing)

-40 to 85°C (-40 to 185°F)

1.2KV for ports and power

EN55022 CLASS A, EN61000-3-2, EN61000-3-3, EN61000-6-4

EN55024, EN61000-6-2, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5,
IEC 61000-4-6, IEC 61000-4-8, IEC 61000-4-11, IEC 61000-6-2

UL/cUL 60950

IEC 60068-2-27

IEC 60068-2-32

IEC 60068-2-6